How to Install HID Xenon Lights

How to Install HID Xenon Lights

High-intensity-discharge (HID) xenon headlights have three important differences compared with halogen headlights: xenon as well as other noble gas headlamps make use of ballast to regulate/maintain the electrical charge on the light bulb; a projector lens is employed instead of a reflector; and good-quality xenon headlamps must final about 10 occasions longer than halogens.

The good news is that HID Xenon headlight assemblies is often installed in most any vehicle, along with the brighter light, superior efficiency, and longer headlamp light beam is often additional economical after a while, specifically if replacing the light bulbs only.


Directions
Set up HID Headlights1. Get a fantastic HID kit. Total conversion kits include two ballasts (1 for each headlamp), two bulbs, mounting hardware and wiring. They also come with a guarantee that is superior for up to one year.
2. Open the hood and take away the two headlight assemblies. If adequate space exists during the engine compartment to eliminate the bulbs, you don't have to remove the headlight housings. HID kits Manufacturer: http://www.uobd2.com/wholesale/auto-hid-xenon-light/Supply
High-quality HID ballasts, xenon HID bulbs for automobile headlight
3. Take away the existing headlight bulbs from your headlight housing. This really is usually achieved by a counterclockwise twist of your socket with the back from the light assembly to release the socket and bulb from your light housing.
4. The HID light could be wider than the halogen opening. Delicately drill or use a circular file to create a wider opening, frequently 15mm.
5. Install the HID lights while in the light assemblies. 1st remove the cover from the bulb, getting careful to not touch the glass portion as oils within the hands could cause blotting within the lights. Use alcohol to eliminate any smudges should you do touch the bulb. Plug the wiring harness to the rubber base, then fit the back cap onto the assembly. When finished, shut the headlight shield tightly by turning within the direction that tightens it.
6. Connect the wires in the HID bulbs to the output of the ballast. The connectors are generally color-coded, and good kits are mistake-proof, together with the plugs going in only one way.
7. Connect the output from your battery or other power supply harness for the relay, and in turn connect the relay towards the input of the ballast.
8. Secure the ballast(s) to any strong position from the engine bay working with double-sided tape, mounting brackets, or zip ties. (Steer clear of high-temperatures regions within the engine bay.)
9. Check the lights' function. If they blink or light intermittently, turn off the electrical power and examine all connections.